How to raise
The frost likes to dry, well-ventilated environments, should be used in sandy soil cultivation, good ventilation, breathable performance, so that the exclusion of excess water and the growth of the roots of the plant.
Frost Dildening Soil Preparation: Peat + Pelicite + Pearl Rocks, and adds appropriate amount of bone powder, and 3 ruttling soil, 3 river sand, 1 garden soil, 1 blend of slag.
Every 1-2 years, in the spring of the spring, the necrosis of the old roots can be cut to dry the stem of the stem of the stems to avoid affecting the normal growth and moisture absorption of plants.
Due to the high moisture content in the plant, the frost is easily rot in over-humid environments. Do not water water.
In order to avoid the sludge of the root moisture, it is preferable to use a basin with drain holes in the bottom. It can be used to use a well-ventilated red ceramic basin; the glass container is absorbed and poor breathable, cautious.
Winter and summer is too high (higher than 35 ° C) or too low (lower than 5 ° C) to stop growth, and should be temporarily reduced or stopped, and the water temperature is restored when the gas temperature is suitable.
Reference watering: 10 days, once, it can be put. Watering frequencies can be increased as appropriate according to different regions and seasonal climate.
The more the light is, the greater the temperature difference between day and night, the more colorful leaves. In the case where the temperature is suitable, it is best to put out outdoor maintenance to ensure sufficient light.
Frost growing the temperature range: 18-25 ° C
Under normal circumstances, the growth or mild frostbite is stopped below 5 degrees Celsius, 0 degrees Celsius and the moisture in the blades below, the cell necrosis.
The frost is very easy to breed.
Breeding can be used to tabbed a plurality of methods such as bud, leaf plug, and divide.
It should be noted that the water is taken in the center of the plants when watering is watering, which is easy to cause rot. And try to prevent the leaves from retaining too much water in the blade, and it is easy to rush away from the white powder on the blade, and the white powder on the blade is not renewed.
When there is water on the blade, you can use the cotton swab to lightly suck away.
The frost is high, the light is insufficient or the soil moisture is long, the whole color is dark, the blade is sparse, accelerates upward, and severly affects orifes the photosynthesis of the plants.
Pay attention to ventilation at high temperatures in the summer, prevent sunburn to avoid sunburn leaves.